Whirlpool ED22HP Use And Care Manual page 19

To change crisper light:
1.
Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
6. Replace bulb with a 40-watt appliance
bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
To change light below ice bin:
1.
Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps
free.
3. Replace bulb with a 40-watt appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
To change upper freezer light
(on some models):
1.
Disconnect refrigerator from power
SUPPly.
2. Lift top of light shield up and pull shield
Out.
3. Replace with a 40-watt appliance bulb.
4. Place shield over bulb and snap shield
into place.
5. Reconnect refrigerator to power supply.
To change dispenser area light:
1.
Disconnect refrigerator from power supply.
2. Reach through dispenser area to
remove bulb.
3. Replace with a heavy-duty 1 O-watt bulb,
which can be purchased from your
Whirlpool dealer.
4. Reconnect refrigerator to power supply.
NOTE:
Not all commercial appliance bulbs
will fit your refrigerator. Be sure to replace a
bulb with one of the same size and shape.
risper
light
Light
below
ice bin
I
Upper f&ezer light
\
19