Axis M11-E Series User Manual page 8

AXIS M11-E Series
Additional settings
• To slow down the shutter speed, set max shutter to the highest possible value.
• Set the max gain to a lower value.
Reduce motion blur in low-light conditions
To reduce motion blur in low-light conditions, you can adjust one or more of the following settings:
Note
Image noise will increase if you increase the gain.
• Increase shutter speed and gain. Go to Settings > Image > Exposure and set Max shutter to a shorter time, and Max gain
to a higher value.
If you are still experiencing motion blur, you can try one of the following:
• Increase the light level in the scene.
• Mount the camera so that objects move toward it or away from it rather than sideways.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
1. Go to Settings > Image > Wide dynamic range.
2. If required, turn on WDR.
3. Use the Tone mapping slider to adjust the amount of WDR.
Image without WDR.
Image with WDR.
8