Install Properly; Level Refrigerator-Freezer; Remove Sales Labels; Clean - Whirlpool ED19MT Use & Care Manual

Install properly.. .
1 Allow ' " (.2 cm) space on each side and at top for
ease of rnstallatron
2 The refrrgerator back can be flush against the
WUII.
3 If the refrigerator 1s to be agarnst a wall, you might
want to leave enough space so the door can be
opened wider
Level refrigerator-freezer.. .
Right to Raise;
Left to Lower
1 Remove base grille [see page 8).
2 To raise front, turn each screw to the rrght
3 To lower front, turn each screw to the left
4 Check wrth level
Remove sales labels.. .
Remove the Consumer Buy Guide label and other
Inside labels before using the refrrgerator. Any glue
left can be taken off with rubbrng alcohol
Clean it
Clean your refrigerator before using It. See clean-
rng InstructIons on page 9
Plug it in...
I
grounding plug
t
Refrigerator
Power Cord
Recommended
Grounding Method
A 115 Volt, 60 Hz, AC only, 15 or 20 ampere fused
electrrcal supply IS requrred It
IS
recommended that
a separate crrcutt serving only this appliance
be provrded.
Do not use an extensron cord
Use a receptacle
which cannot be turned off with a switch or pull
chain.
See rndrvrdual electrrcal requirements and
grounding instructron sheet in your lrterature
package
4