Removing Freezer Bin; Ice Cube Trays; Changing The Light Bulbs; Removing The Base Grille - Whirlpool ED19EK Use & Care Manual

Removing freezer bin.. .
For proper air movement, keep the freezer bin in
place when the refrigerator is operating.
To remove the bln:
l
Slide out to the stop.
l
Lift the front to clear the stop.
l
Slide out the rest of the way.
To replace the bin:
l
Place bin on the slides.
l
Make sure the stops clear
the front of the slides.
l
Slide bin in.
Ice cube trays.. .
If cubes are not used, they may shrink The moving
cold arr starts a slow evaporatron. The longer cubes ~
are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Slightly twist.
Changing the Light bulbs.. .
WARNING: Before removing the light shield for
cleaning or for replacing the bulb,
unplug the refrigerator or turn off
electricity leading to refrigerator at
the main power supply. Shock and
injury could occur.
I
Pull Off the Dial;
Pull Out at the Bottom
f,. _. 'T
Removing the base grille...
2 Pull grille outwards as shown.
3. Do not remove Tech sheet
fastened behrnd grille
light bulbs behind refrigerator and freezer con-
trol consoles:
1 Pull control knob straight off.
2 Pull bottom of control panel straight out.
3 Lift top of panel off supports.
4 Replace with a 40.watt appliance bulb.
5 Replace panel in reverse order
Support Tab!
To replace:
1 Line up grille support tabs with metal clips
2 Push firmly to snap into place.
3.
Close the doors.
7