Introduction Thank you for purchasing the Ubiquiti® UniFi® Dream Machine Beacon. This Quick Start Guide is designed to guide you through installation and also includes warranty terms. Package Contents UDM-B System Requirement Either of the following is required: • iOS or Android Smartphone with UniFi App Installed ™...
Hardware Overview System LED Color State Status Flashing Initializing. White Steady Factory defaults, waiting for integration. Alternating Device is busy; do not touch or White/ unplug it. This usually indicates Blue that a process such as a firmware upgrade is taking place. Steady Successfully integrated into a network and working properly.
Reset Button Button Description Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button Reset for about 10 seconds until the LED starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the device will automatically reboot.
Page 6
Configuration The UDM-B is automatically discovered by the UniFi Network Controller of a UniFi AP or UDM that can hear the UDM-B. Access the configuration screen of the nearby UniFi AP or UDM. Ensure that Allow meshing from other access points is enabled (enabled by default).
Page 7
Using the UniFi Network App 2. Log in to your controller and adopt the UDM-B on the Devices screen.
Page 8
Using the UniFi Network Software 1. From the UniFi Network Controller dashboard, click Devices in the left menu bar. 2. On the Devices screen, locate the UDM-B in the list of devices under the Model column. To adopt the UDM-B, click Adopt.
Specifications UDM-B Dimensions 169.7 x 112.15 x 32.2 mm (6.68 x 4.42 x 1.27") Weight 260 g (9.17 oz) Max. Power Consumption 11.5W Power Method Power Supply Supported Voltage Range 100 - 240VAC, 0.3A Max., 50/60 Hz System Status Operating Frequency 2.4 GHz 5 GHz Max.
Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in a location that can be submerged by water. WARNING: Avoid using this product during an electrical storm.
Page 11
Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Page 12
CAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : l’appareil ne doit pas produire de brouillage; l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.