Basic Setup; Installation; Assembling The Camera; Power-Up - ADT RC845 Quick Installation Manual

ADT HD Indoor Camera
Quick Installation Guide

2 Basic Setup

This section provides information on how to assemble and
configure the RC845 Indoor HD Camera for enrollment.
Installation

Assembling the Camera

1. Temporarily locate the camera close to the computer for enrollment.
2. Attach the camera stand to the camera and connect the power
cable.
3. Screw/attach the camera onto the camera stand.
Figure 2-1 Attaching the Camera to the Stand

Power-up

1. Connect the 12V power adapter to the camera and power up near the
location where you will be performing the enrollment.
Caution: Use the power adapter provided. Using a different power
adapter may result in hardware damage.
RC845 Indoor Full HD Camera Installation Guide
Figure 2‐2 Power Connection
Basic Setup
FCC ID: P27RC845
7