ADT RC845 Quick Installation Manual page 10

ADT HD Indoor Camera
Quick Installation Guide
3 ADT Control Enrollment
This section provides instructions for wirelessly enrolling the RC845 Indoor HD
Camera onto the ADT Control platform. This process uses the Soft AP method
to wirelessly connect the HD Camera to the Customer's network.
Using Soft AP to Enroll Camera
1. Set up the camera as described in the previous section.
2. Connect the camera's AC power adapter and plug it into a power
outlet.
3. Wait for the power LED to blink green/amber.
4. Connect to the camera's network SSID using a laptop or mobile device.
The SSID is the model number of the camera and part of the MAC
address. For example, SSID = RC845 (XX:XX:XX).
5. Open a web browser (IE, Chrome, Firefox, etc.). Type in adtinstall.com
and you will be directed to the install wizard page.
6. Choose a language.
7. Click Scan for Network SSID and select the Customer's router SSID.
RC845 Indoor Full HD Camera Installation Guide
ADT Control
Enrollment
FCC ID: P27RC845
9