Troubleshooting - Bosch VJD‑8000 Operation Manual

14 en | Troubleshooting
5

Troubleshooting

For general appearance check the Advanced tab settings of each decoder.
Issue
Cannot access cameras.
In a multi-decoder setup: Settings in the
Configuration Manager program do not affect
the IP Matrix application.
The selected monitor is not highlighted.
No connections after restarting the decoder.
Not all monitors can be populated with video
connections.
2019-12 | V1 | DOC
Solution
Check the general password. All cameras
must use this password as a common user
password.
Only settings on the master decoder affect
the IP Matrix application. Select the master
decoder and try again.
Check the distance between cameos.
Increase the distance if necessary.
Enable reconnect on restart or call a favorite.
Check the number of decoders that defines
the maximum possible connections on one
decoder device.
Or
Your layout may provide more monitors than
allowed by the maximum monitors per
display.
Operation manual
IP Matrix 9.60 for KBD Digital
Bosch Security Systems B.V.