Toro REELMASTER 3100-D Operator's Manual page 14

Controls
7
8
10
11
1. Throttle
2. Hour meter
3. Temperature light
4. Oil pressure light
5. Glow plug indicator light
6. Alternator light
7. Cutting unit drive switch
8. Cutting unit shift lover
9. Ignition switch
10. Parking brake
11. Lift lever lock
Hour Meter (Fig. 9)—Indicates the total hours of
machine operation. The hour meter functions whenever
the key switch is ON.
Engine Coolant Temperature Warning Light (Fig.
9)—This light glows if the engine coolant temperature is
high. If the traction unit is not stopped and coolant
temperature rises, the engine will stop.
Oil Pressure Warning Light (Fig. 9)—This light glows
if the engine oil pressure drops below a safe level.
Alternator Light (Fig. 9)—The light should be off when
the engine is running. If it is on, the charging system
should be checked and repaired as necessary.
Glow Plug Indicator (Fig. 9)—The light will glow
when the glow plugs are operating.
Parking Brake (Fig. 9)—Whenever the engine is shut
off, the parking brake must be engaged to prevent
accidental movement of the machine. To engage the
parking brake, pull up on the lever. The engine will stop
if the traction pedal is depressed with the parking brake
engaged.
Lift Lever Lock (Fig. 9)—Move the lever rearward to
prevent the cutting units from dropping.
Reel Speed Control (Fig. 10)—(Located under console
14
4
3
6
5
9
Figure 9
cover)—To obtain the desired clip rate (reel speed), turn
2
the reel speed control knob to the appropriate setting for
height of cut and mower speed. Refer to the Selecting
Clip Rate section of the manual.
1
Backlap Control (Fig. 10)—(Located under console
cover) Turn the knob clockwise for backlapping and
counterclockwise for mowing. Do not change the knob
position when the reels are turning.
Fuel Gauge (Fig. 11)—Shows the amount of fuel in the
tank.
Seat Adjustments (Fig. 11) Fore and Aft Adjustment—
Move the lever on the side of the seat outward, slide the
seat to the desired position and release the lever to lock
the seat into position.
Deluxe Seat Adjustments Weight Adjustment—Push
the lever up or down to adjust to the operator's weight.
Lever up—light operator, lever in middle position—
medium-weight operator or lever down for a heavy
operator. Inclining Backrest—Turn the handle to adjust
the angle of the backrest.
2
1. Reel speed control
2. Backlap control
1
Figure 10