Table of Contents
Advertisement
Product Dimensions
26-3/4"
(67.9 cm)
depth with
handle
24-1/4"
(61.6 cm)
36"
(91.4 cm)
cooktop
height
42"
(106.7 cm)
overall
height
29-7/8" (75.9 cm)
width
Installation Clearances
Cabinet opening dimensions shown are for 25" (64 cm) counter-
top depth, 24" (61 cm) base cabinet depth and
36" (91.4 cm) countertop height.
If the cabinet depth is greater than 24" (61 cm), the oven frame
must extend beyond cabinet fronts by
13" (33.0 cm) max.
upper cabinet depth
30" (76.2 cm) min. cabi-
net opening width
30-1/8" (76.5 cm)
opening width
18" (45.7 cm)
2" (5.1 cm) min. coun-
min. clearance
tertop space to side
upper side
wall or other com-
cabinet to
bustible material
countertop
This shaded area
recommended for
24"
electrical outlet.
(61.0 cm)
(12.7 cm)
3"
(7.6 cm)
NOTE: 24" (61 cm) minimum when bottom of wood or metal cab-
inet is protected by not less than
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an unprotected wood or metal cabi-
net.
If installing a range hood or microwave hood combination above
the range, follow the range hood or microwave hood combination
installation instructions for dimensional clearances above the
cooktop surface.
" (13 mm) minimum.
For minimum
clearance to
top of cooktop,
see NOTE.
This shaded area
recommended for
installation
of gas pipe.
10" (25.4 cm)
8"
(20.3 cm)
5"
(12.7 cm)
5"
2"
(5.1 cm)
" (0.64 cm) flame retardant
5
Advertisement
Table of Contents
