Table of Contents
Advertisement
XW-111™ Wi-Fi Digital Sensor Users Manual
Section 4: Control Page
In Stand-Alone mode, and when the internal HTTP Server is enabled, the digital input status can be
monitored by using a web browser, the CBW Mobile app, and/or by sending text commands to an XML
status/control page.
4.1 Browser Operation
Once the XW-111 is set up, users can access the Control Page by either clicking the Control Page tab
from within the setup pages, or by using a web browser and typing the IP address of the XW-111 into the
web browser address bar. For example, using the default IP address, the user would enter
http://192.168.1.2. If the IP address is changed from the default, the user must use the new IP address.
Note that if any port is used other than the default port 80, the port must also be included in the request.
For example, to access the device at port 8000 enter: http://192.168.1.2:8000.
4.1.1 XW-111 Digital Input Display
While the control page is open, the digital input and battery information will update every three seconds.
The Control Page is normally what users see and use, it can be configured to fit your needs. The Inputs
tab (Section 3.7: Inputs Tab) has a setting for the device title (Module Description.) Each digital input
name can be customized with a 14-character description such as "Front Door" or "Water Alarm.")
Xytronix Research & Design, Inc.
Control Page
Page 33
Advertisement
Table of Contents
