Table of Contents
Advertisement
XW-111™ Wi-Fi Digital Sensor Users Manual
•
Error sending DATA command: Error sending or error receiving proper response to the SMTP
DATA command. This error generally indicates a problem with the SMTP server.
•
Error sending message body: Error sending or error receiving proper response to sending the
content of the email. This error generally indicates a problem with the SMTP server.
•
Error resolving DNS: Error resolving the hostname in the SMTP Server field on the setup pages.
If this field is an IP address, ensure no numbers are greater than 255, there are four numbers
separated by dots, and there are no alphabetic characters. If the SMTP Server field is a host
name, ensure the DNS Server on the WiFi Networks tab or DNS server issued via DHCP is valid
and has a proper DNS record for the SMTP Server host provided.
•
Error establishing connection: Error configuring security on SSL socket or error creating socket.
•
Error with SSL handshake: Could not successfully negotiate a cipher or protocol version to use
for the SSL connection to the SMTP server. Ensure the configured port is indeed expecting an
SSL connection.
•
No SMTP server configured: No valid SMTP Server has been specified. Enter the host name or
IP address of the SMTP Server you would like to use.
•
No To address configured: No recipients of the email alerts has been configured. Enter at least
one email address into any of the Email fields.
•
Success: The test email was sent successfully.
Note: When the XW-111 is in Access Point mode, your smart-phone or computer connects directly to it
and the XW-111 is not connected to the Internet. In this mode, no email messages can be sent and the
Test Email button is disabled.
Xytronix Research & Design, Inc.
Web Server
Page 21
Advertisement
Table of Contents
