Table of Contents
Advertisement
PROBLEM
Nothing will
operate
(continued)
The oven will
not operate
POSSIBLE CAUSE
The flow of combustion
and/
or ventilation
air to the range
is blocked.
The Oven Selector is not
turned to BAKE or BROIL.
A delayed start time has
been set.
SOLUTION
Remove blockage to airflow to and
around range.
Turn the Oven Selector to the desired
setting.
Wait for the start time to be reached.
The Oven Temperature
Control is not turned to a
temperature
setting.
The
automatic
MEALTIMER
clock is not set correctly.
Push in and turn the Oven Tempera-
ture Control to a temperature
setting.
Set the MEALTIMER
clock correctly.
(See "Using the automatic
MEALTIMER"
clocK' on page 16.)
Burner fails to
light
The Stop or Start Time
Knobs for the
automatic
MEALTIMER
clock are not
set at the correct time of day.
The power cord is not
plugged into a live circuit with
proper voltage.
A household fuse has blown
or a circuit breaker has
tripped.
Burner ports are clogged.
If a delay start or stop is not desired,
the Stop and Start Time Knobs must
be turned to the correct time of day.
Turn knobs till they pop out.
Plug the power cord into a live circuit
with proper voltage. (See Installation
Instructions.)
Replace household fuse or reset
circuit breaker. In case of prolonged
power failure, manually light burners
(see page 8).
Clean with a straight pin
(see page 25).
Burner flames
are uneven
Burner ports are clogged.
Clean with a straight pin (see page
25). If this fails, call an authorized
Whirlpool@ service technician
for
service.
Burner makes
popping noise
when on
Burner is wet from washing.
Let dry.
Control
knOb(S)
You are not pushing in before
will not turn
Push control knob(s) in before turning
turning.
to a setting.
continued
on next page
29
Advertisement
Table of Contents
