Logitech Rally Implementation Manual page 16

LOGITECH RALLY AND RALLY PLUS IMPLEMENTATION GUIDE
ii. Connect the speakers to the Display Hub.
iii. Connect the USB C cable between the camera and Display Hub. The camera draws
more power than normally available from an USB port and so must be connected to
the Display Hub. Note, the camera can optionally be mounted upside down and an
internal sensor will automatically invert the image and remote control function. The
camera must be power cycled when mounting upside down.
iv. Connect the USB type A/type B cable between the Display Hub and the meeting computer.
v. Connect the CAT6 cable between the Display Hub and the Table Hub.
p16