Meeting Computer At Table; Connecting The Table Hub - Logitech Rally Implementation Manual

LOGITECH RALLY AND RALLY PLUS IMPLEMENTATION GUIDE

4. MEETING COMPUTER AT TABLE

Connections when the meeting computer is at the table.
a. CONNECTING THE TABLE HUB
i. Connect the USB type A/type B cable between the Table Hub and meeting computer.
ii. Connect the HDMI cable(s) between the Table Hub and computer. Note that Rally can
pass through two HDMI signals from the computer to drive two displays. If using just
one display, connect it to the HDMI 1 jack on the Table Hub.
p11