•
Bar codes within a range of lengths
•
Any length of bar codes.
Table B-4 lists the requirements for each option.
Code length option
One discrete length will be decoded
Two discrete lengths will be decoded
Lengths within a range will be decoded
Any length bar code will be decoded
Setting Prefixes and Suffixes Via Serial Commands
To append a prefix and suffixes to the decode data:
1. Set the Scan Data Transmission Format (parameter 0xE2) to the desired option.
2. Enter the required value(s) for Prefix (0x69), Suffix1 (0x68) or Suffix2 (0x6A) using
the hex values for the desired ASCII value from Table B-5.
Scan Value
1000
1001
1002
1003
1004
1005
1006
1007
1008
Table B-4. Setting Variable Code Lengths
Discrete length to decode 0x00
Higher length value
Lower length value
0x00
Table B-5. Character Equivalents
Full ASCII Code
39 Encode Char.
Hex Value
00h
01h
02h
03h
04h
05h
06h
07h
08h
Miscellaneous Code Information
L1 value
Lower length value
Higher length value
0x00
Keystroke
%U
$A
$B
$C
$D
$E
$F
$G
$H
L2 value
CTRL 2
CTRL A
CTRL B
CTRL C
CTRL D
CTRL E
CTRL F
CTRL G
CTRL H
B-7