Setting Up Your Scanner - Symbol M2004-I200 Quick Reference Manual

M

Setting Up your Scanner

1. Listen for click.
Interface Cable
If you are using a Synapse cable, the scanner autodetects your
host. If you are using another cable, set the M2000 to
communicate with your particular POS host by scanning the
appropriate bar code(s) in the Cyclone
Reference Guide.
Power up the host. The green LEDs on top of the scanner flash 3
times while 3 power-up beeps sound, indicating the scanner is
operational.
C y c
2 0 0 0
l o n e
S e r
3. Connect power
supply (if necessary).
2. Connect to host.
TM
M2000 Series Product
2
TM
i e s