Important Safety Information - Raven SmarTrax MD Installation Manual

CHAPTER
1
Read this manual and the operation and safety instructions included with your implement and/or controller
carefully before installing the SmarTrax™ MD system.
•
Follow all safety information presented within this manual.
•
If you require assistance with any portion of the installation or service of your Raven equipment, contact
your local Raven dealer for support.
•
Follow all safety labels affixed to the SmarTrax MD system components. Be sure to keep safety labels in
good condition and replace any missing or damaged labels. To obtain replacements for missing or damaged
safety labels, contact your local Raven dealer.
When operating the machine after installing SmarTrax MD, observe the following safety measures:
•
Be alert and aware of surroundings.
•
Do not operate SmarTrax MD or any agricultural equipment while under the influence of alcohol or an illegal
substance.
•
Remain in the operator's position in the machine at all times when SmarTrax MD is engaged.
•
Disable SmarTrax MD when exiting the operator's seat and machine.
•
Do not drive the machine with SmarTrax MD enabled on any public road.
•
Determine and remain a safe working distance from other individuals. The operator is responsible for
disabling SmarTrax MD when the safe working distance has diminished.
•
Ensure SmarTrax MD is disabled prior to starting any maintenance work on SmarTrax MD or the machine.
If the SmarTrax MD system is removed from the machine, install the protective trim (P/N 019-0159-590) on the
ring gear assembly teeth for protection.
•
The machine must remain stationary and switched off during SmarTrax MD installation or maintenance.
Manual No. 016-5030-062 Rev. A
I mportant Safety
C h a p t e r 1
Information
NOTICE
WARNING
1