Advertisement
7. Attach the mounting brackets (Fig. 18) to the wall, keeping in mind that the hanging frame will be about
3mm above the top of the bracket (about 66 mm from the bottom edge of the bracket). Mounted brackets must
be within 30 cm from the ends of the screen frame. After hanging, the screen profile is locked on the handle,
Fig. 19.
After hanging on the handles, the screen can be moved in the horizontal plane (left, right).
Fig.18
8. Two wall mounting plates are included in the kit so that the lower corners of the screen do not stick out from
the wall (Fig. 20).
Tip! Pull down the suspended screen frame and fix the plate from Fig. 20 to the magnet from Fig. 17. Push the
screen close to the wall. Then, mark the shape of the plate on the wall, which will serve as a template for its
attachment.
Fig.20
.
w
w
w .
k
a
Fig.19
Fig.21
u
b
e
r .
e
-7-
u
Advertisement
