Using Your Range; Using The Surface Units; Using The Coil Element Module - Whirlpool RS373PXW Use & Care Manual

Using Your Range
Surface unit
drill
S&face unit
marker indicator light
Using the surface units
Control knobs must be pushed in
before turning them to a setting. They
can be set anywhere between HIGH
and OFF.
Surface unit and grill markers
The solid dot in the surface unit marker
shows which surface unit is turned on
by that knob.
The grill marker shows which control
knobs operate the grill.
Surface unit indicator lights
One of the surface unit indicator lights
on the control panel will glow when a
surface unit is on.
Burn and Fire Hazard
Be sure all control knobs are
turned to OFF and the indicator
lights are OFF when you are not
cooking. Someone could be
burned or a fire could start if a
surface unit is accidentally left
ON.
Using the coil element module
Until you get used to the settings,
use the following as a guide. For best
results, start cooking at the high
settings; then turn the control knob
down to continue cooking.
Use HIGH to start foods cooking; to
bring liquids to a boil.
Use 7 - 9 to hold a rapid boil; to fry
chicken or pancakes.
Use 5 or 6 for gravy, puddings and
icing; to cook large amounts of vege-
tables.
Use 2 - 4 to keep food cooking after
starting it on a higher setting.
Use LOW to keep food warm until
ready to serve.