Table of Contents
Advertisement
USI NG Y OU R R A NG E
After the countdown is over, 3 short tones
will sound, followed by 1 tone that sounds
every 6 seconds until you press any other
command pad.
To reset the Minute Timer:
Repeat Steps 1 and 2 on page 13.
To cancel the Minute Timer:
Press Timer On/Off pad until TIMER stops
flashing on the display (about 4 seconds).
Using the Off/Cancel pad
The Off/Cancel pad will cancel any function
except for the Clock and Timer functions.
When you press the Off/Cancel pad, the
display will show the time of day or, if
Minute Timer is also being used, the time
remaining.
Audible signals
Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.
To shut off repeating end-of-timer
countdown signal:
1.
Press and hold the Off/Cancel pad for
10 seconds.
2.
A short tone will sound to tell you the
signal has been changed.
Repeat the above steps to turn the signal
back on.
14
TIMER
ON/OFF
OFF
CANCEL
Advertisement
Table of Contents
