Download Print this page

OMC W150 Installation And Maintenance Instruction page 3

Continuous pen controllers, recorders

Advertisement

1. MONTAGGIO
Gli strumenti sono provvisti di quattro colonnine standard
per l'immediato montaggio a quadro o a parete. Su richiesta
viene fornita una staffa di montaggio per palina da 2"
(verticale o orizzontale).
Nota: particolare attenzione dovrà essere dedicata alla
scelta del luogo più adatto al montaggio degli strumenti, per
evitare che gli apparecchi siano soggetti a vibrazioni o si
trovino esposti a vapori corrosivi, umidità, temperature
ambiente oltre i limiti consentiti.
1.1 Montaggio a quadro
Il montaggio a quadro avviene introducendo la cassetta in
una apertura praticata nella lamiera del pannello e
fissandola con le quattro colonnine e le apposite piastrine di
riscontro (vedi Fig. 1.1.1 e 1.1.2).
Fig. 1.1.1
FORATURA PANNELLO
DRILLING
R 1,5
1.2 Montaggio a parete
Il montaggio a parete richiede la posa in opera di due profilati in ferro provvisti di zanche di fissaggio a muro. Fissare la
cassetta con quattro viti passanti M6 da avvitare nei fori filettati delle colonnine di montaggio (vedi Fig. 1.2).
1.2 Wall mounting
Wall mounting requires the installation of two metal brackets provided with apposite legs. The housing is fastened to the
panel by screwing four M6 screws into the threaded holes located in the legs (see Fig. 1.2).
Max 10mm
238
220
1. INSTALLATION
The instruments are equipped with four standard legs for
direct panel or wall mounting. On request a mounting bracket
is provided for mounting the unit on a 2" tubing (vertical or
horizontal).
Note: Particular attention must be paid to the selection of the
mounting site, to protect the equipment from exposure to
vibrations,
corrosive
temperatures exceeding the recommended limits.
1.1 Panel mounting
Insert the instrument housing into an opening made in the
panel and fix it in place by means of the four legs and the
corresponding adapter plates (see Fig. 1.1.1 and 1.1.2).
Fig. 1.1.2
COLONNINE
LEGS
Zanche - Legs
Parete
Wall
Fig. 1.2
vapors,
moisture,
PANEL
PANNELLO
PIASTRINE DI
RISCONTRO
ADAPTER
PLATES
M6
Min.
200mm
or
ambient
Pag. 3

Advertisement

loading

This manual is also suitable for:

W650ep