Table of Contents
Advertisement
E
'
ND USER
S MANUAL
7. I
MPROPER
Despite the safety devices, operators must
take the greatest care to avoid situations that
might endanger themselves or others.
Anyone required to operate the pedestal
must be appropriately trained in its proper
use and must also be informed about the con-
struction and features of the pedestal and its
safety systems.
7.1. H
ANDLING
The column must be completely depres-
surised and detached from the compressed
air system, if any, before any assembly, dis-
mantling, maintenance or adjustment work is
carried out.
To depressurise the column simply press
valve H (Figure 6) until gauge (Figure 8) in-
dicates zero pressure.
Such work should only be carried out by
competent personnel trained in the correct
procedures.
7.2. O
P
PERATOR
OSITION
All operations should be carried out at
floor level.
Rev.2 – 10/2016
P70 PLUS PEDESTAL
U
SE
It is strictly forbidden to handle the ma-
chine from a position on any lift, hoist or
crane and equally forbidden to stand on the
pedestal itself.
WARNING! It is strictly forbidden to
climb onto the pedestal.
7.3. P
S
EDESTAL
TABILITY
The distribution of the weight of the ele-
ments mounted on the pedestal (fluid head
and camera) should be such as to maintain
their centre of gravity well inside the rim of
the castered base.
WARNING! Items whose centre of
gravity is too close to the rim of the
castered base (Jib arms) could cause
the pedestal to tip over eventually
while moving the pedestal.
When positioning the pedestal, make sure
that the wheels do not run into obstacles such
as steps, since this could compromise the
stability of the pedestal.
7.4. P
U
ROPER
SE
The pedestal has been designed and built
for use as prescribed in section 3 of this
manual.
WARNING! It is strictly forbidden to
use the pedestal in any other way than
indicated here.
16/18
Advertisement
Table of Contents
