Table of Contents
Advertisement
Mount Display Bracket to Display Panel
Small Displays (Up to VESA 200x200)
1.
Attach display bracket to TV VESA holes using 4 bolts (D, E, F, G, H, or I) and washers (M or N); spacers (J, K, or L)
may be required depending on display design. (see Figure 3).
Display Back
Bolts (D – I)
Large Displays (Up to VESA 400x400)
Attach display bracket to TV VESA holes using 4 bolts (D, E, F, G, H, or I) and washers (M or N); spacers (J, K, or L)
may be required depending on display design. (see Figure 4).
Bolts (D – I)
(size depends on display)
Attach Screen to Arm Assembly
Small Displays (Up to VESA 200x200) and Large Displays (Up to VESA 400x400)
ATTENTION: This procedure requires two persons to perform.
1.
Ensure that the arm is set to its maximum negative tilt prior to attaching the display.
2.
Ensure wingnuts have been uninstalled from bottom bolts on display bracket.
Adapter
Plate
Figure 3
Figure 4
5
200mm (7.8")
100mm (4")
75mm (3")
400mm (15.75")
Advertisement
Table of Contents
