Table of Contents
Advertisement
160K(i) 60 Hz Power Conditioner | Owners Manual
GENERAL TROUBLESHOOTING
THERE ARE DANGEROUSLY HIGH VOLTAGES PRESENT WITHIN THE ENCLOSURE OF
THE POWER SUPPLY SYSTEM. CAUTION MUST BE TAKEN WHEN WORKING WITH
THE ENCLOSURE. IT IS RECOMMENDED THAT ALL WORK BE PERFORMED BY
SYMPTOM
1. No Output on One or More Phases.
2. Output is too High or too Low.
3. Input Breaker Tripping Off.
SERVICE
Transtector shall provide immediate phone support/consultation and if possible, same day parts shipment.
(contact must be prior to 12:00 PM PST). If necessary, on site service shall be scheduled the same day
for service to be conducted within 24 to 48 hours, based on customer requirements. Typical service hours
are 8 AM to 5 PM Monday through Friday.
Rick Ribbeck
Phone: (O) 208-635-6400 Ext. 5867 | (M) 208-762-6112
E-mail: rribbeck@infiniteelectronics.com
E-mail: rribbeck@transtector.com
Transtector Systems
10701 Airport Dr.
Hayden Lake ID 83835
**** WARNING ****
QUALIFIED ELECTRICAL PERSONNEL ONLY.
PROBABLE CAUSES
A. No Input.
B. Blown Fuse.
C. Defective SCR or Power Mod.
D. Defective Control Card.
E. Defective Sense Card.
A. Input Out of Range.
B. Control Card Adjustment.
C. Defective Control Card.
D. Defective Sense Card.
E. Defective SCR or Power Mod.
A. System Overloaded.
B. Defective Breaker.
C. Shorted Taps.
18
Advertisement
Table of Contents
