Installation - Electrical; Electrical Connections - Boiler; Power Supply Cable Connection - Watts Aerco AM Series Operation & Maintenance Manual

AM Series Pool Heater User Manual
SECTION 7: INSTALLATION – ELECTRICAL
SECTION 7: INSTALLATION - ELECTRICAL
7.1 Electrical Connections – Boiler

7.1.1 Power Supply Cable Connection

Provide and install a fused disconnect or service switch (15 amp recommended) as required by
prevailing codes. To connect the electrical line voltage power supply cable, refer to Figure 7-1.
Figure 7-1: Line Voltage Connection
OMM-0111_B: • GF-146-P • 10/29/2019 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 36 of 47