Installation Procedure; Operating Conditions And Installation Space; Operating Conditions; Installation Space - Sony VSR-2000A Installation Manual

1-2. Installation Procedure

1-3. Operating Conditions and Installation Space

1-2. Installation Procedure
n
Keep the packing materials such as carton, cushion, etc.
after unpacking.
When transporting the unit, pack the unit using the materi-
als provided. Pack the HDDs separately.
Start
Determination of
installtion place
Option boards
installtion
Rack mounting
HDD unit installtion
Connection
System connection
Formatting HDD
Adjustment
End
1-2 (E)

1-3. Operating Conditions

and Installation Space
1-4. Power Supply
1-5. Installation
Optional Boards
1-6. Rack Mounting
1-8. HDD Unit
Installation
1-9. Signal Input and Output
1-10. Connecting Connectors
and Cable
1-11. System Connection
1-12. Switch Setting of the
Connector Panel
1-13. HDD Physical Format
and Logical Format
1-14. Video System
Adjustment
1-3. Operating Conditions and

Installation Space

1-3-1. Operating Conditions
1. Set the operating temperature and humidity
within the following conditions.
Operating Temperature : +5 dC to +40 dC
Operating humidity :
Storage temperature :
2. Do not install this unit in the following
locations.
. Areas where the unit will be exposed to direct
sunlight or any other strong lights.
. Dusty areas or areas where the unit will be subject to
vibration.
. Areas with strong electric or magnetic fields.
. Areas near heat sources.
. Areas where the unit will be subjected to electrical
noise.
. Areas where the unit will be subjected to static
electricity noise.
. Unstable and unbalanced places.
3. To prevent the internal temperature from
rising, ensure air ventilation of the place
where the unit is installed.
The ventilating slots should be 20 cm away from the
walls for proper ventilation.
c
Do not block the ventilation slots.
If the ventilation slots are blocked, overheating inside the
unit may cause fire.
10 % to 90 %
(Condensation not allowed)
_20 dC to +60 dC
VSR-2000A