Installing Bksr-2020 - Sony VSR-2000A Installation Manual

1-5. Installing Optional Boards

1-5-1. Installing BKSR-2020

General Information for Installation
. The BKSR-2020 can be attached into slot No. 1, No. 2
and No. 3 of the VSR-2000A.
VSR-2000A (rear side)
. To prevent from wrong insertion when the board is
replaced, stick the slot label (supplied with BKSR-2020)
after inserting the board.
. To maintain the cooling effect of the VSR-2000A, do not
leave the slots open.
Be sure to attach the blank panel on the empty slot.
. Adjustments after installation/replacement of board are
not necessary.
Installation Procedure
1. Turn off the main power switch of the VSR-2000A.
2. Remove the two screws of the desired slot, and remove
the blank panel.
n
Keep the removed blank panel.
1-6 (E)
No.1 slot
VSR-2000A
BVTT
3 x 6
Blank panel
BVTT3 x 6
3. Insert the BKSR-2020 to the slot. Push the handle of
the board in the direction of installing, and insert it in
the mother board completely.
4. Fix the BKSR-2020 with the two screws that are used
to fix the blank panel.
5. Stick the slot label (supplied with the BKSR-2020) of
the inserted slot number.
BKSR-2020
n
To remove a board, hold the handle of the board and pull it
in the direction of removing and remove the board to the
front.
BKSR-2020
Handles
Installing
Removing
BVTT
3 x 6
Slot label
VSR-2000A