Installing Licenses - Sony IPELA NSR-500 Series Installation Manual

To access the Setup Menu
from the logon screen
Click [Administration Menu].
1
r
Click [Setup Menu].
2

Installing Licenses

You can install a license on the NSR to
enable registration of additional cameras.
You can register up to 16 cameras under
factory default conditions, but this can be
increased to up to 24 cameras.
Notes
• For details on licenses, refer to the
NSBK-CL05 Installation Guide (PDF).
• For details on acquiring licenses, contact
your Sony dealer.
Logging On
Enter the user name and password, and
click [Logon].
Default user name: admin
Default password: admin
r
When logon is successful, the Camera Auto
Registration dialog appears.
Notes
• Only Sony cameras will be located and
registered.
• Only cameras with IP address settings
that have not been changed from factory
default conditions will be located and
registered. To register cameras with IP
addresses that have been changed, use
[Easy Setup] (page 26), or return the
camera IP address settings to default
conditions and restart the unit.
• If you want to manually specify cameras
for registration, click [No] and proceed to
the next section, "Registering Cameras."
• If you select the [Do not show this dialog
box again] check box, this dialog box will
not appear on subsequent startup of the
software, and cameras will not be
located. If you selected this check box
previously and want to perform
automatic camera registration again later,
configure settings in the [Administration
Step 3: Settings 25