Table of Contents
Advertisement
Reflector Bowls
Burn and Electrical
Shock Hazard
Make sure all surface
units are OFF before
removing
surface
units and reflector
bowls.
Failure to do so can result in burns or elec-
trical
shock.
1.
Turn off all surface units.
3. Pull the surface unit straight away
from the receptacle.
2. Lift the edge of the unit, opposite
the receptacle, just enough to
clear the element hold down clip
and the reflector bowl.
4. Lift out the reflector bowl. See
"Cleaning
Chart" on page 22 for
cleaning
instructions.
16
Advertisement
Table of Contents
