TCL Alcatel FLASH2 PLUS Repair Document page 57

L2 Repair Document
IMEI label
Note：
Ⅰ. Please remove the IMEI label if it is dirty, corrugated or broken, and then clean the PCBA and
make sure there's no residuum before return it to L3;
Ⅱ. PCBA label must be retained on PCBA, no matter what the status (even it is dirty, corrugated or
broken) it is.
2. Packing requirements
a) Wrap PCBA with anti-static bag
Note: please keep the anti-static bag clean and intact, especially not to paste any label on it.
b) Choose box according to shipping quantity. Each slot usually put 4 or 5pcs. (4pcs for big one and
5pcs for small one). Meanwhile, use Wrinkled tape (marking the material code and qty) to
distinguish the PCBA of different code.
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
√
PCBA label
√
FL02 Level 2 Repair Document
TCL
Communication Ltd.
√
×
Page
57/59