TCL Alcatel FLASH2 PLUS Repair Document page 14

L2 Repair Document
 Light Sensor
I. It will show the value of ambient light and the value will change according to the
phone's environment (Bright test: use the electric torch in another phone to
shine the phone; Dark test: use something to shadow the phone), then it will
say "dark: OK", "bright: OK" if it functions well;
II. Press "Pass" to continue.
 Proximity Sensor
I. Please shawdow the senor according to instruction and it will say "near: OK",
"far: OK" if it functions well;
II. Press "Pass" to continue.
 SIM CARD
I. Insert SIM card and the phone will detect it if it functions well;
II. Press "Pass" to continue.
 Memory Card
I. Insert SD card and the phone will detect it if it functions well;
II. Press "Pass" to continue.
 Battery TEMP
I. It will display the value of battery temperature, current, battery voltage, capacity
rate and battery present if it functions well;
II. Press "Pass" to continue.
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
FL02 Level 2 Repair Document
TCL
Communication Ltd.
Page
14/59