Technical Data; Ec-Declaration Of Conformity - Husqvarna DC 5500 Operator's Manual

Technical data

Power, kW/hp
Rated voltage, V
Rated current, A
Power supply
3
Air flow m /h / cfm
Max. vacuum, bar/psi
Suction inlet diameter mm/inch
Primary filtration surface area, m
Micro filter surface area, m
Weight, kg/lbs
Size, (LxWxH), mm/inch
Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed L
(A)
Sound levels (see note 2)
Sound pressure level at the operators ear,
dB(A)
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Noise pressure level according to EN 60335-2-69. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.0 dB(A).

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under sole responsibility that the dust extraction unit
Husqvarna DC 5500 dating from 2010 serial numbers and onwards (the year is clearly stated on the rating plate, followed by the
serial number), complies with the requirements of the COUNCILíS DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
• of December 12, 2006 "relating to electrical equipment" 2006/95/EC.
• of June 8, 2011 "relating to restriction of certain hazardouz substances" 2011/65/EU
The following standards have been applied: EN ISO 12100:2010, EN 55014-1:2006, EN 55014-2/A1:2001, EN 61000-3-2:2006,
EN 61000-3-3:2008, EN 60335-2-69:2009.
Gothenburg 19 September 2012
Anders Ströby
Vice President, Head of Power Cutters and Construction Equipment
Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
16 –
English
TECHNICAL DATA
DC 5500, 400V
5,5/7,5
380-440
12
3 phase
550/325
0,3/4,35
75/3
2
/ sq. ft. 2,2/24
2
/ sq. ft. 6,6/71
215/473
1100x660x1960 /
43x26x77
92
dB
WA
93
77
) in conformity with EN 60335-2-69.
WA