Fluke FlexCam Quick Start

1.

MEMORY:

The rubber cover, located on top of the
camera, is where the COMPACT FLASH card is
installed for data storage (required for saving).
2.

POWER:

Insert the BATTERY into the slot on the
bottom of the camera.
3.

START:

To turn the camera on, press the ON/OFF
switch, located on the left side of the camera,
adjacent to the LCD display.
The button should light up (green) and the start-up
screen for the Flexcam will appear.
6.

PAUSE IMAGE:

the camera once. This will pause the image.
 Hold the button down and it will capture the paused picture, saving it to disk.
.
1© 2014 The Snell Group / 322 N. Main St. / Barre, VT 05641 / 800.636.9820 / www.thesnellgroup.com
Compact Flash Port
Joystick/Cursor
Power
AC Power &
USB/Firewire Data Ports
4.

AUTO ADJUST:

start-up, press the Auto-Adjust button.
 This will automatically set the camera's LEVEL and
SPAN.
5.

FOCUS:

Once adjusted, use the MANUAL FOCUS
(rotate lens) to bring the target into view.
 Press the Auto-Adjust button once more to further
clarify the image.
To capture an image, press the trigger button on the front of
Enter/Select
Auto-Adjust
Battery Release
Once the camera has completed
1
QuickStart:
Camera Menu
Focus by turning lens
Flexcam