Frus That Do Not Require Sun Cluster Maintenance Procedures - Sun Microsystems StorEdge 3900 Series Manual

Task Map: Maintaining a Storage System
TABLE 3–1
Task
Upgrade storage array firmware.
Replace a disk drive.
Replace a node's host adapter.
Add a node to the storage array.
Remove a node from the storage array.
FRUs That Do Not Require Sun Cluster
Maintenance Procedures
This section contains lists of administrative tasks that require no cluster-specific
procedures.
SPARC: FRUs for the Sun StorEdge 3900 Series, StorEdge
6910, and StorEdge 6960 Systems
SPARC: See the Sun StorEdge T3 and T3+ Array Installation, Operation, and Service
Manual for the following procedures.
SPARC: Replacing an Ethernet cable.
I
SPARC: Replacing a power cable on the storage array.
I
I SPARC: Replacing a unit interconnect card (UIC).
I SPARC: Replacing a power and cooling unit (PCU).
SPARC: For the following procedures, see the Sun StorEdge 3900 and 6900 Series 20
Reference and Service Manual. For a URL to this storage documentation, see
Documentation" on page
SPARC: Replacing an Ethernet hub.
I
I SPARC: Replacing a storage service processor.
I SPARC: Replacing a GBIC or an SFP on an FC switch that connects to a storage
array.
SPARC: Replacing a storage array-to-switch fiber-optic cable.
I
7.
Chapter 3 • Maintaining a Sun StorEdge 3900 or 6900 Series System
(Continued)
Information
"How to Upgrade Storage Array
Firmware When Using Mirroring"
on page 29 or "How to Upgrade
Storage Array Firmware When Not
Using Mirroring" on page 30
"How to Replace a Disk Drive"
on page 31
"How to Replace a Host Adapter"
on page 32
Sun Cluster system administration
documentation
Sun Cluster system administration
documentation
"Related
25