Operation - Festo DGP-8 Operating Instructions Manual

DGP(L)−...−B
7. Open up the one−way flow control valves
slowly until the desired slide speed is
reached.
8. Open up the adjusting screws for the end
position cushioning on both sides until
the desired cushioning is reached.
The moving mass should reach the end
position safely, but not strike hard against
it.
8

Operation

Avoid changing from lubricated to non−lubricated compressed air.
S
Wear will increase due to the washed−out service life lubrication.
Warning
S Make sure that:
nobody can place his/her hand in the path
of the moveable mass (e. g. by providing a
protective grill).
there are no objects in its path.
It must not be possible to touch the
DGP(L)−... until the mass has come to a
complete stand.
34
Fig. 29
Fig. 30
Fig. 31
Festo DGP(L)−...−B 0609g English