Basicdome User Commands - Bosch BasicDome Series Instruction Manual

Indoor Pendant & In-ceiling Models | User Manual | User Commands
2

BASICDOME USER COMMANDS

(Unlocked Commands)
Commands
Scan
AutoPan
Preset Menu
Preset Tour
Preset Tour Period
Preset Save
Preset Call
Edit Preset Title
Edit Preset Tour
Modify Preset Tour
Record A
Record B
Continuous Playback A
Playback A
Continuous Playback B
Playback B
Image Stabilization
Scan+Auto Pan Speed
Backlight Compensation
View Factory Settings
Software Version
Bosch Security Systems | 10 December 2003
Keystrokes Description
ON/OFF-1-ENTER Camera continuously pans in the last direction in which the joystick was moved. Moving the
joystick stops the scan.
ON/OFF-2-ENTER Camera continuously pans back and forth between limits. Moving the joystick stops the
scan.
SET-100-ENTER Allows modification of Preset scenes from an on-screen menu (recommended).
ON/OFF-8-ENTER Camera cycles through Preset Scenes. Moving the joystick stops the tour.
ON/OFF-15-ENTER On-screen menu changes the length of waiting time between presets.
SET-1-99-ENTER Stores the current scene and camera settings in memory. Preset 1 is shown when camera
is initialized.
SHOT-1-99-ENTER Recalls the scene and camera settings from memory.
ON/OFF-62-ENTER Modifies the Preset names. On-screen instructions are provided.
SET/SHOT-900-ENTER Presets can be removed/restored (On/Off) from the Preset tour using an on-screen menu.
Presets can still be displayed manually.
SET/SHOT-901-999-ENTER Presets can individually be removed/restored (On/Off) from the Preset tour. Example:
[Set][915][Enter] will clear Preset 15 from the tour. Presets can still be displayed manually.
ON/OFF-100-ENTER Records "A" camera and PTZ controls that can be played back. Once the sequence is
recorded, you must exit record in order to play back.
ON/OFF-101-ENTER Records "B" camera and PTZ controls that can be played back. Once the sequence is
recorded you must exit record in order to play back.
ON/OFF-50-ENTER Camera will repeat "A" recorded sequence.
ON/OFF-51-ENTER Camera will play the "A" recorded sequence once.
ON/OFF-52-ENTER Camera will repeat "B" recorded sequence.
ON/OFF-53-ENTER Camera will play the "B" recorded sequence once.
ON/OFF-24-ENTER Camera attempts to filter out vibrations caused by wind and other environmental conditions.
ON/OFF-14-ENTER On-screen menu allows the setting of the AutoPan and AutoScan speeds. Default is 30
degrees/second.
ON/OFF-20-ENTER Camera will adjust for a bright background.
ON-47-ENTER Displays the factory default settings.
ON-66-ENTER Briefly displays the camera software versions.
EN | UM5