Whirlpool GS395LEH Use & Care Manual page 26

USING THE SELF-CLEANING CYCLE
S
ETTING THE CONTROLS
To delay the start using delay start time:
1.
Press AUTO CLEAN.
This will automatically set a 3
Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1 ⁄ hour before the cycle is over.
2
2.
Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or shorter
than 3 ⁄ hours, use the Hour and Minute pads to
1
2
set the cleaning time you want. Press the "up" (s)
or "down" (t) pad(s) until a time between 2
hours shows on the display.
•
Use 2 ⁄ hours for light soil.
1
2
•
Use 3 1 ⁄ -4 1 ⁄ hours for average to heavy soil.
2 2
3.
Press DELAY START TIME.
4.
Set the start time.
Press the "up" (s) or "down" (t) pad(s) until the
correct time shows on the display. The oven will
automatically come up with the stop time by
adding the set cleaning time to the set start
time.
5.
Press START/ENTER.
The door will lock as soon as you press
START/ENTER.
6.
After the Self-Cleaning cycle starts:
7.
After the Self-Cleaning cycle ends:
LOCKED goes off and the door unlocks.
NOTE: The stop time will be the start time plus
the cleaning time.
26
.
( CONT )
PRESS
1 ⁄ -hour Self-
2
AUTO
CLEAN
PRESS
⁄ -4 ⁄
1 1
2 2
PRESS
DELAY
START
TIME
PRESS
PRESS
START
ENTER
YOU SEE
YOU SEE
HR MIN
(example for 4
YOU SEE
YOU SEE
HR MIN
(example for 2:30 start time)
YOU SEE
DELAY
5 SEC
YOU SEE
HEAT
TIME
YOU SEE
CLEAN
TIME
CLEAN
TIME
1 ⁄ -hour cycle)
2
CLEAN
START TIME
CLEAN
START TIME
ON
CLEAN
ON
LOCKED CLEAN
D TIME
CLEAN