Using The Single-Line Diagram; Browsing Setting Values - ABB Relion 650 Series Operation Manual

Section 5
Using the HMI
5.1.10

Using the single-line diagram

The single-line diagram is created with PCM600.
1. Select Main menu/Control/Single line diagram.
The single-line diagram view is displayed.
GUID-28771BAD-A125-4319-9DCA-6274D9F16D26 V1 EN-US
Figure 24: Example of a single-line diagram
2.
Select an object with
Selection of an object is indicated with a square border that moves when
used.
Switch objects can have additional icons that present the switch object states.
•
•
3.
Press
4. Confirm the control operation in the dialog that opens.
5.
To move between the single-line diagram pages, press
5.1.11

Browsing setting values

1.
Select Main menu/Settings/IED Settings and press
2.
Press
56
or .
= Switch object is in substituted state.
= Switch object is interlocked.
to select open or to select close the object.
Select the single-line diagram for the default view in Main menu/
Configuration/HMI/Screen/1:SCREEN/DefaultScreen.
and then to activate the setting group number selection.
© Copyright 2011 ABB. All rights reserved
1MRK 500 093-UUS A
GUID-72AC5BD6-D1B5-46D4-83B9-A10870125FCF v4
and
or .
GUID-81116DC8-1E66-4144-920F-07C79F1C76B0 v2
.
Operation manual
are
650 series