Section 7
Operating procedures
GUID-E4D9067B-1168-4287-9EF3-E251C6D13C4C V3 EN-US
Figure 42: Clear view
The content of the Clear menu depends on the configuration configured with PCM600.
2.
Select the item to be cleared with
3.
Press
4.
To clear other items, repeat the steps.
7.4
Changing the IED functionality
7.4.1
Defining the setting group
A mechanism for limiting the number of writings per time period is included in the IED to prevent
the flash memory to be worn out due to too many writings. As a consequence it may take up to an
hour to save changes. If the auxiliary power is interrupted before a change is saved, that change is
lost.
7.4.1.1
Activating a setting group
IED settings are planned in advance for different operation conditions by calculating setting
values to different setting groups. The active setting group can be changed by the IED application
or manually from the menu.
1.
Select Main menu/Settings/Activate setting group/1:SETGRPS and press
76
, select OK to confirm the selection or Cancel to cancel the selection.
Do not switch off the auxiliary power supply to the IED before changes, for
example, setting parameter or local/remote control state changes are saved.
© Copyright 2011 ABB. All rights reserved
or
.
1MRK 500 093-UUS A
GUID-A9853F1B-78ED-4AEF-AAE2-C27FF3DAE408 v1
AMU0600439 v5
.
650 series
Operation manual