Monitoring Condition Monitoring Data; Measured And Calculated Values; Measured Values; Using The Local Hmi For Monitoring - ABB Relion 650 Series Operation Manual

Section 7
Operating procedures
1. Select Main menu/Diagnostics/Internal events or IED status to monitor the latest fault
indication.
2.
Press
GUID-4F637E6B-3E81-4030-BE08-03C1DF7CAED0 V1 EN-US
Figure 35: Fault indication
7.1.1.4

Monitoring condition monitoring data

1. Select Main menu/Diagnostics/IED status/General.
2.
Press
With PCM600 the user can map output signals from condition monitoring related function blocks
to the appropriate destinations.
7.1.2

Measured and calculated values

All values show the momentary measurement value and some include demand values calculated
from a set period.
7.1.2.1

Measured values

Measured values can be accessed through the LHMI.
7.1.2.2

Using the local HMI for monitoring

1. Select Main menu/Measurements to monitor measured and calculated values.
70
or to scroll the view.
The internal event list is not updated dynamically. To update the list, leave the
Internal events menu and then select it again.
or to scroll the view.
© Copyright 2011 ABB. All rights reserved
1MRK 500 093-UUS A
GUID-76EAADCA-1ABE-4E4D-B057-FE0CF8C8E431 v4
GUID-4C43C62F-D641-4880-8067-B9D9C8EE25BA v6
AMU0600431 v5
AMU0600432 v5
650 series
Operation manual