Advertisement
LH OUTGOING CIRCUITS RH OUTGOING CIRCUITS
FED FROM:
INCOMING CABLE SIZE:
INSTALLATION DATE:
CONTRACTOR:
TOP FEED ADAPTOR FITTING EPBKTFSN2
USED IN CONJUNCTION WITH EPBKN1253 AND EPBKN1254
KEY LOCK FITTING
EPBDLK1
TOP ENTRY
Panelboards are supplied ready for bottom entry.
For top entry convert as shown below.
Alternative Earth position
(both sides)
Main
Cover
Prior to cabling, check pan assembly alignment with main cover
LABEL FITTING
Ensure all way labels are fitted in the correct places
BOTTOM FEED
L1
L1
Warning -
Adaptor
Intellectual Property Rights
Shield
Eaton wishes to make it clear that it owns intellectual property rights in the
product which it manufactures (whether or not listed in this leaflet) and that
it will take legal action against any party found to be manufacturing, using,
or selling any article which infringes the company's intellectual property. All
marks in this document identified with an R symbol or a TM symbol adjacent
to the mark are trademarks of Eaton.
2019 Eaton Electric Limited.
C
All rights reserved.
The use to which this product is put and its place of installation is outside our
control. Particular care should therefore be taken to follow the instructions given
here and to ensure their continued availability in conjunction with the use of the
product.
No responsibility can be accepted by us if these instructions are disregarded.
Further copies of these instructions and information concerning the installation
and proper use of this product can be obtained by contacting the:
Technical Services Department
Eaton Electric Limited, Middleton, Manchester. M24 7GQ
Tel: +44(0)8700 545 333,
email: ukcommorders@eaton.com
www.eaton.com/recycling
TOP FEED
Phase
L1
Label
Busbar
Way
Label
L1
Earth
Labels
Busbar
Way
Label
Phase
Label
Cover Way
Label
Cover Way
Label
Rotate Inner Cover
and Pan assembly
0
180
Advertisement
