Communication Report/Data Transmission (Optional)
Data from the JetSort is sent to the computer in the form of a report. There are two different
modes to which the JetSort can be programmed.
Data Transmission
Normal
Wedge
1. Press MODE/COIN to move the cursor to the bottom menu line.
2. Press CONT to select Normal or Wedge.
Comm Report
Normal
Brake Setting
The Brake Setting cannot be changed.
Communication Ports
JetSort has four communication ports for peripherals such as remote display, printer,
computer, bar-code reader, JetScan
the JetSort, select the appropriate data transmission functions, such as baud rate, stop bits and
parity. For more information, contact your local Cummins Allison Representative.
Device Options
Prt
Co
Bcr
JtS
JtC
Rmt
Standard computer protocol will be generated.
The machine interfaces to the Cummins Allison Software Wedge.
™
or JetCount
Printer
Computer
Bar-code reader
JetScan
currency scanner
™
JetCount
currency scanner
®
Remote display – available on Port 1
Description
®
. In order to connect a peripheral device to
Description
Setup | JetSort
®
2000 series | 35