Bug-O Systems UNI-BUG II Instructions And Parts Manual page 2

PROTECT YOURSELF AND OTHERS FROM SERIOUS INJURY OR
DEATH. KEEP CHILDREN AWAY. BE SURE THAT ALL INSTALLATION,
OPERATION, MAINTENANCE AND REPAIR PROCEDURES ARE
PERFORMED ONLY BY QUALIFIED INDIVIDUALS.
ELECTRIC SHOCK can
kill.
1.The equipment is not waterproof.
Using the unit in a wet environment
may result in serious injury. Do not
touch the equipment when wet or
standing in a wet location.
2.Never open the equipment without first
unplugging the power cord or serious
injury may result.
3. Verify the customer-supplied power
connections are made in accordance
with all applicable local and national
electrical safety codes. If none exist,
use International Electric Code (IEC)
950.
4.Never remove or bypass the equipment
power cord ground. Verity the equip-
ment is grounded in accordance with all
applicable local and national electrical
safety codes. If none exist, use lnterna-
tional Electrical Code (IEC) 950.
READ INSTRUCTIONS
Read the instruction manual before
installing and using the equipment.
DO NOT LEAVE EQUIPMENT UNATTENDED
Remove from work site and store in a safe location.
SAFETY
1. Do not plug in the power cord without
2. Do not leave the equipment unattended.
Faulty or careless user installation is
possible. As a result, never stand or
walk underneath equipment.
1. Never try to stop the pinion from
2.Do not remove any protective panels,
CAUTION
WHEN NOT IN USE!
EQUIPMENT DAMAGE
first verifying the equipment is OFF
and the cord input voltage is the same
as required by the machine or serious
damage may result.
Remove from the worksite and store in a
safe location when not in use.
FALLING EQUIPMENT
can cause serious personal
injury and equipment
damage.
MOVING PARTS can
cause serious injury.
moving except by removing power or
by using the STOP control.
covers or guards and operate equipment.
POSSIBLE.