Memory (Dc-2020C); Memory Unit - DGC DC-2000C Series Instruction Manual

DC-2000C SERIES ULTRASONIC THICKNESS GAUGE
- Adjust the measured value by pressing
value equal to the actual thickness of test piece.
- Press
The gauge will return to the Measurement mode.
〖8.4.5〗 Memory (DC-2020C)
- Press into the menu
- The screen shows:

1. Memory Unit

2. Delete Memory
3. Data transfer
- Press or
8.4.5.1 Memory unit
The gauge has a memory capacity of 5,200 test results. The memory is
composed by alphabet A-Z + location number. There are maximum 200 test
results in each alphabet. Users could set an Alphabet freely to store the test
result.
- Press
- Press
press
- Press
- Press
away the probe from the workpiece each time.
to confirm.
"5. Memory"
into the selected item, press
"5. Memory"-"⑴Memory unit"
into the menu
or to set one alphabet from A-Z as the current file; then
to confirm.
to Esc. Menu and into the measurment.
key to store each test result with a location number after take
or
12
and make the test
to confirm.