Space Requirements - Huawei SUN2000 Series User Manual

SUN2000-(12KTL-25KTL)-M5 Series
User Manual
●
●
●
Mounting Structure Requirements
●
●
●
●

4.3.2 Space Requirements

Installation Angle Requirements
The inverter can be wall-mounted or support-mounted. The installation angle
requirements are as follows:
●
●
Figure 4-1 Installation angle
Clearance Requirements
●
Issue 01 (2022-06-15)
Do not install the inverter outdoors in salt areas because it will be corroded
there and may cause fire. A salt area refers to a region within 500 m of the
coast or prone to sea breeze. Regions prone to sea breeze vary with weather
conditions (such as typhoons and monsoons) or terrains (such as dams and
hills).
The inverter should be installed in a well-ventilated environment to ensure
good heat dissipation.
You are advised to install the inverter in a sheltered area, or with an awning
over it.
The mounting structure where the inverter is installed must be fireproof.
Do not install the inverter on flammable building materials.
The inverter is heavy. Ensure that the installation surface is solid enough to
bear the weight.
In residential areas, do not install the inverter on drywalls or walls made of
similar materials which have a weak sound insulation performance because
the noise generated by the inverter is noticeable.
Install the inverter vertically or at a maximum back tilt of 15 degrees to
facilitate heat dissipation.
Do not install the inverter at forward tilted, excessive back tilted, side tilted,
horizontal, or upside down positions.
Reserve enough clearance around the inverter to ensure sufficient space for
installation and heat dissipation.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation
19