Removing Mounting Plate From The Dish; Finding A Good Mounting Location - MotoSAT DataStorm Installation Manual

This guide is provided as a help and not a total solution for every installation.
Common sense and concern for customers equipment will make for a good installation.
WARNING – WHEN RAISING THE DISH MANUALLY, THE CONTROL CABLE MUST NOT BE CONNECTED TO THE MAIN
CONTROLLER! If the control cable is connected to the Main Controller when you manually move the dish, you will damage
the internal circuitry. If the Control Cable is already connected to the Main Controller and you want to raise or lower the
dish manually, DISCONNECT the Control Cable from the Main Controller FIRST.
STEP 2. REMOVING MOUNTING PLATE FROM THE DISH (OPTIONAL, you do not have to remove the
mount from the mounting plate for installation. It may be helpful in some situations.)
Four screws attach the Dish Mount to the Dish Mounting Plate. Locate and remove the four screws and lift the Mount off the
mounting plate.
STEP 3. FINDING A GOOD MOUNTING LOCATION
9