Table of Contents
Advertisement
This guide is provided as a help and not a total solution for every installation.
Common sense and concern for customers equipment will make for a good installation.
7/16
Screw Driver
Open Ended Wrench
Philips #2
RECOMMENDED HARDWARE
USE THE PROPER SCREWS FOR THE TYPE OF ROOF YOU HAVE.
Stainless Steel Hardware is ALWAYS recommended.
Fiberglass
Metal
Roof
Roof Only
Screw size recommended (depending on roof structure) #14X1"
FIBERGLASS ROOFS – Must pre-drill. Self-tapping screws will chew up and damage the roof. Use non-self tapping screws.
METAL ROOF
- Metal roofs may use self-tapping screws.
WOOD OR COMPOSITE – Sheet Metal Type,
OTHER RECOMMENDED HARDWARE
Cable Clamps
Zip Tie Straps
Mini Screwdriver
Flat Blade
Wood or Composite
Roof
non-self
tapping screws.
Dicor Sealant
7
Advertisement
Table of Contents
