Table of Contents
Advertisement
This guide is provided as a help and not a total solution for every installation.
Common sense and concern for customers equipment will make for a good installation.
NOTE - FOLD THE STRANDS BACK OVER THE PLASTIC COVER.
It is important that you fold over the wire strands of the coax cable over the outside plastic covering so that proper
grounding is made to the connector you will be attaching... Not doing this will result in systems going bad while on the road.
Also...make certain that no metal wire strands are shorting the center wire of the coax cable.
Attach Coax Connector to end of Coax Cable
Use a crimping tool to secure the connector to the cable.
16
Di-electric jell is to be placed at
this location to seal the connector.
Advertisement
Table of Contents
