Honda HSM1336i Owner's Manual page 63

N (neutral)
DRIVE CLUTCH
LEVER
MAIN SHIFT LEVER
AUGER CLUTCH SWITCH
The auger and blower will start to turn
when the drive clutch lever and auger
clutch switch is operated. Check
around the snow blower for safety
before operating the lever and switch.
4) Check that the main shift lever is in
the N (neutral) position and
squeeze the drive clutch lever.
5) Push the auger clutch switch to
operate on the auger and blower.
• The indicator (green) comes on
when you push the auger clutch
switch.
• When the auger clutch switch is
pushed for four seconds or
longer, the protection function
activates. This stops the auger
and blower from turning.
• The auger and blower keep
turning while the drive clutch
lever is squeezed. Push the auger
clutch switch again to stop the
auger and blower. (Interlocking
operation of the drive clutch lever
and auger clutch switch)
OPERATION
61